Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 27.06.2025 03:57

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

I post the exact comment here.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

There are three different concepts here that are getting confused.

Can whey protein cause allergies in people sensitive to milk?

A circuit breaker is similar, but is resettable.

nine

Upvotes:

Is it difficult to learn C# if you are already familiar with Java?

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Barnstars:

What does a fuse do?

Photos: Why it took courage for these women to pose for the camera - NPR

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

A fuse is a non-resetable over current circuit protector.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Musk-Trump Spat Hits New High As Musk’s Ex Piles On - HuffPost

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

He then asserts :

One is “what exactly is in a ‘surge protector’ ? ”

Food and fitness make or break success on weight loss meds, report finds - ABC News

The third is lightning and “how it gets conducted into a home.”

2024–10–14 [Omar Gharbi Omar Gharbi ]

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Can you share a story of someone who had a lucky experience while hitchhiking?

what exactly is a ‘surge’ protector?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

These devices are installed between the “hot” and “neutral” and protective ground.

It has been said that people with ADHD can often hyperfocus. Can that be an advantage?

This is where the MOV conducts again, and dissipated the energy.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Belmont Stakes: Hill Road faces challenges beyond tough field - Horse Racing Nation

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Now when you have a certain ac resistance, then a current flows in a loop.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

Milky Way has 50-50 chance of colliding with neighbor galaxy - NewsNation

One

The MOV will conduct when the voltage exceeds 50% of line voltage.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

David Goyer on Marvel Turning Down His ‘Blade’ Reboot Offer, Why ‘The Sandman’ Is Ending and Those Neil Gaiman Allegations: He ‘Wasn’t as Involved in Season 2’ - Variety

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Phil Spencer Just Lowkey Confirmed The Halo: Combat Evolved Remaster Making 2026 A Massive Year For Xbox - Kotaku

He then describes the function of a fuse.

First Sentence:

The bolt then partially travels down the line to your home.

What are the defining characteristics of woke liberals and conservatives in the United States?

[image of Common-mode choke]

but this device (an Inductor) … impedes the rapid changes in the current.

These are simplified answers to the original question, and does not change anything I wrote above.

New COVID variant linked to painful ‘razor blade throat’ symptom - San Francisco Chronicle

a photo is worth a thousand words.

At one ohm, the resistor has a maximum of 1 watt power.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

‘Stronger’ and ‘On Muscle’: What Goes to Work When We Work Out - WSJ

(Dc diagram shown, AC is similar).

What is lightning?

It seems Mohan does not understand the difference between a comment and an Answer.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

The other is “what does a “fuse” do?”

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

In schematic diagrams this is the symbol for a fuse:

eight

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

But it can get overloaded, and no longer works.

But… the neutral is now “floating” because of the 1 ohm resistance.

He then describes Rainy Season and Lightning.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

so, what happens?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

So, the voltage could go up to 500 volts, and the fuse will not open up.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

This one hit behind the barn.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Here is a simplified AC power diagram.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

the problem then depends on "how fast does the fuse operate?".

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Edit 2024–10.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

[old diagram got deleted by accident]

This device then solves the entire problem.

For this case there are devices called Metal oxide varistors (MOV).

Can the fuse protect the electronic devices from lightning instead of a surge protector.

but I think this circuit , shows a few more pieces.

This is where this question deviates from being a 'generic' question, and becomes more specific.

It also is a device that limits the change in current flow.

This is 'the assistant's answer'

At least they know the answer if they wanted it.

An AC voltage/ current source, and an ac inductive load.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

There are two important concepts here.

2024–10–10[John johnson John Johnson ]

2024–10–16 [ OO OLAOYE OYEBODE ]

Because the load is inductive, the current lags the voltage.(by a bit).